Wenzhou nasike auto parts co.,ltd
NEWS
21
2024
-
03
What precautions should be taken when using lubricating oil for powder metallurgy gears?
Author:
When using lubricating oil for powder metallurgy gears, the following points should be noted:
1. Choose appropriate lubricating oil: Select the appropriate lubricating oil according to the working conditions and requirements of powder metallurgy gears. The viscosity, extreme pressure performance, anti-wear performance and other parameters of lubricating oil need to be matched with the working conditions of the gear.
2. Control the amount of lubricating oil: Excessive or insufficient lubricating oil can affect the normal operation of gears. The amount of lubricating oil should be reasonably controlled based on factors such as gear size, speed, and load to ensure that the gears are fully lubricated.
3. Regularly replace lubricating oil: Lubricating oil will gradually contaminate and deteriorate during use, losing its lubricating performance. Therefore, it is necessary to regularly replace the lubricating oil based on its service life and working conditions to ensure the normal lubrication of the gears.
4. Prevent foreign object contamination: When using lubricating oil, it is necessary to prevent foreign objects from entering the lubricating oil to prevent blockages in the oil circuit or damage to the gears. Lubricating oil can be filtered using equipment such as filters.
5. Monitoring lubricating oil temperature: Excessive or insufficient lubricating oil temperature can affect the lubrication effect of gears. The temperature of lubricating oil should be regularly checked and monitored to ensure it is within the normal range.
6. Pay attention to the storage and usage environment of lubricating oil: Lubricating oil should be stored in a dry, clean, and well ventilated place, avoiding direct sunlight and high temperatures. When using lubricating oil, it is important to avoid the mixing of dust, moisture, and other impurities.
7. Follow the manufacturer's recommendations: Different powder metallurgy gears may have different lubrication requirements, so when using lubricating oil, the recommendations and guidance of the gear manufacturer should be followed.
News
Add: NO.862, 10 ROAD, BINHAI ECONOMIC AND TECHNOLOGICAL DEVELOPMENT ZONE, WENZHOU
Tel: +8613806605374
Email: nsk@nasikeauto.com